Rear Axle Construction

Fiberglass Rear Housing Parts
Metal Reinforcement for 3D Printed Spring Hanger
Fiberglass Center Sections and Backing Plates
Rear Axle and Leaf Spring Setup
Rear 3D Printed Spring Hanger with Fiberglass Backing Plate
Rear Axles Modified
Rear Axle Mock up Rear Shot
Rear Axle Mock up Right Side Shot
Rear Axle Tube Cut Away

Rear End was constructed using a fiberglass center section combined with  3 inch exhaust tubing and weld on axle flanges. The leaf spring was constructed using a steel main leaf and multiple fiberglass leafs. The backing plates and drums were constructed of fiberglass while the spring hanger was made of using a combination of 3D printed parts overlaying steel. 

Frame

Bare Frame
Painted Frame

Engine

Engines with Heads back shot
Engine with Heads right side shot
Engine with Heads side shot
Engine with Heads trans bell housing installed

3D Printed Parts

3D Printer working on Intake
3D Printed Carbs
3D Printer working on Intake 2
3D Printed Spark Plug 2
Both 3D Printers Working
3D Printed Spark Plug
3D Printed Intake, Carbs with Fiberglass Backing Plates and Drums
Intake
3D Printed Gauge Set
3D Printed Gauge Face
3D Printed Front license plate brackets